Instructions / Assembly

WINE RACK
ADD CHIC DÉCOR TO YOUR WINE COLLECTION
BEFORE
AFTER
Always thoroughly review directions on the package before using any product.
All it takes is one coat of stain to create a fabulous display for your bottles. Choose from any
color in the Varathane 3X Wood Stain Palette.
As shown Varathane 3X Wood Stain in Black Cherry,
and Varathane Triple Thick Satin Polyurethane
ITEMS
• Drop Cloth
• Gloves
• Clean Lint Free Rags
• Sandpaper (120, 180,
and 220-grit)
• Tack Cloth
• Varathane 3X Wood Stain
• Varathane Triple Thick
Polyurethane
• Wine Rack
• High Quality Synthetic Bristle Brush
STEPS
1. PREPARE: Always work in a well-ventilated area.
Cover the floor and nearby items with drop cloths.
2. SAND: Sand the surface of the wine rack
lightly, progressing through 120, 180, and 220-grit
sandpaper. Always sand in the direction of the
grain. Remove sanding dust between each grit of
sandpaper by lightly dragging the tack cloth across
the surface.
3. STAIN: Using a clean, lint-free rag, generously
cover the wine rack with wood stain. Let the stain
sit for 2-3 minutes (or as instructed on the label)
then wipe off any excess using a clean rag. Tip:
Wipe in the direction of the wood grain. Let dry
for 1 hour.
4. PROTECT: Protect your wine rack by applying 1 coat
of Varathane Triple Thick Polyurethane using a high
quality synthetic bristle brush. Allow approximately 2
hours to dry to touch. Allow 48 hours to cure before
moderate use of project and 7 days for total cure.
Visit www.homedepot.com/rustoleum
for other great ideas, products and inspiration.