SDS

SAFETY DATA SHEET
Vaporizer LLC. Page 4 of 7 Vaporizer Calcium Chloride Flake
7.3 SPECIFIC USES:
Concrete Acceleration, Ice Melting, Dust Control, Road Base Stabilization .
8. EXPOSURE CONTROLS - PERSONAL PROTECTION
8.1 EXPOSURE PARAMETERS:
Chemical Name CAS# ACGIH TLV OSHA TWA
Sodium Chloride 7647-14-5 10 mg/m³ Total Dust 15 mg/m³ Total Dust
8.2 EXPOSURE CONTROLS:
VENTILATION AND ENGINEERING CONTROLS: Use with adequate ventilation to ensure exposure levels are
maintained below the limits provided above.
The following information on appropriate Personal Protective Equipment is provided to assist employers in complying
with OSHA regulations found in 29 CFR Subpart I (beginning at 1910.132) or equivalent standard of Canada, or
standards of EU member states (including EN 149 for respiratory PPE, and EN 166 for face/eye protection), and those of
Japan. Please reference applicable regulations and standards for relevant details.
RESPIRATORY PROTECTION: Not normally required when using this product. If necessary, use only respiratory
protection authorized in the U.S. Federal OSHA Respiratory Protection Standard (29 CFR 1910.134), equivalent U.S. State
standards, Canadian CSA Standard Z94.4-93, the European Standard EN149, or EU member states.
EYE PROTECTION Safety glasses or goggles are recommended to prevent eye contact. If necessary, refer to U.S. OSHA
29 CFR 1910.133, Canadian Standards, and the European Standard EN166, Australian Standards, or relevant
Japanese Standards.
HAND PROTECTION: Protective gloves are recommended to prevent skin contact. If necessary, refer to U.S. OSHA 29
CFR 1910.138, the European Standard DIN EN 374, the appropriate Standards of Canada, Australian Standards, or
relevant Japanese Standards.
BODY PROTECTION: Use body protect appropriate to task being performed. If necessary, refer to appropriate Standards
of Canada, or appropriate Standards of the EU, Australian Standards, or relevant Japanese Standards.
9. PHYSICAL and CHEMICAL PROPERTIES
9.1 INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES:
APPEARANCE (Physical State) and COLOR: This product is a white solid, flakes.
ODOR: None
ODOR THRESHOLD: Not Applicable
pH: Not Applicable
MELTING/FREEZING POINT: 772°C (1,422°F)
BOILING POINT: Not Applicable
FLASH POINT: Not Applicable
EVAPORATION RATE (n-BuAc=1): Not Available
FLAMMABILITY (SOLID, GAS): Not Applicable
UPPER/LOWER FLAMMABILITY OR EXPLOSION LIMITS: Not Applicable
VAPOR PRESSURE (mm Hg @ 20°C (68
°
F): Negligible at ambient temperature
VAPOR DENSITY: Not Applicable
RELATIVE DENSITY: Not Applicable
DENSITY: Not Applicable
SPECIFIC GRAVITY: Not Available
SOLUBILITY IN WATER: Not Available
WEIGHT PER GALLON: Not Available
PARTITION COEFFICENT (n-octanol/water): Not Applicable
AUTO-IGNITION TEMPERATURE: Not Applicable
DECOMPOSITION TEMPERATURE: Not Available
VISCOSITY: Not Available
VOC g/l / Lb/gal: Not Available
9.2 OTHER INFORMATION:
No additional information available.