Vapir One Available at Vape World USER’S GUIDE V5.
Important Instructions IMPORTANT OPERATING INSTRUCTIONS FOR VAPIR ONE VAPORIZERTM SUPERCHARGED FAN MODELS DUE TO HIGH AIR PRESSURE, TEMPERATURES MAY FLUCTUATE SEVERAL DEGREES CAUSING THE GREEN LIGHT TO FLICKER BETWEEN RED AND GREEN. THIS IS NORMAL. It is imperative that you place your Vaporizer´s fan setting on the HIGH or H position when starting it up. Failure to do this may cause damage to your Vaporizer that is not covered under warranty.
Identifying the Parts 1 2 4 13 12 3 5 6 7 8 10 11 1. Vapor Outlet Valve 2. Accurate Digital Temperature Control Press + to increase temperature. Press - to decrease temperature. Maximum temperature is 400 °F (204 °C). 3. Push-Button Heat Control Turns heat On or Off. 4. Fan Speed Switch Adjusts speed of fan. 5. LCD Screen Displays data. Screen toggles between set temperature and current temperature. 6. Red/Green Ready Light.
Instructions For Use First turn the fan setting to the High ( H ) position, then turn the unit on by pressing the on switch to the On position. Once you hear the fan has engaged and is up to speed, you can immediately turn the fan to the Low ( L ) position and begin using. *Make sure the fan is on low when heating up your Vapir ONE. It’s as easy as 1-2-3 i HELPFUL HINT: FILLING THE HERB DISK Whenever possible, grind herbs before filling disk. This will allow your materials to be heated more evenly.
Herb Tube Attachment For best taste, we recommend following the procedure below to eliminate any plastic tastes: 1. Soak tube in warm-hot (not boiling!) water for 30 minutes. Tip: Add essential oils to water for better taste. Essential Oils are available for purchase at Vapir.com 2. Remove cap by twisting top portion of unit and flipping cap over. 3. Insert warm tube through back of cap. 4. Use clean pliers to pull tube through cap. Tube attachment is for flavor delivery purposes.
• LEAVE FAN ON WITH THE HEAT OFF FOR 2-5 MINUTES AFTER USE. THIS WILL COOL THE UNIT AND PREVENT DAMAGE CAUSED BY HEAT. NEVER STORE A HOT UNIT. • This unit and many of its components get very hot! Read all directions and heed all cautions carefully before using this device. Serious injury may result from improper operation. • Optional tube attachment is for flavor delivery purposes. Never put your mouth to outlet valve. It may be hot.
Instructions For Balloon Inflation Kit Cut the tube to a length of 3-4 inches for best results when using with the balloon. This Vapir ONE is equipped with a new supercharged heater. Changing the fan speed may or may not noticeably affect the temperature. It is not necessary to heat up your unit to the maximum temperature to inflate balloons. Please use a moderate temperature between 170ºC/300ºF and 176ºC/350ºF when preheating your unit. Using a higher temperature may cause burning of your herbs.
Digital Element Herb Grinders 10 Pack of Re-Useable Empty Herb Disks Car Charger/Power Inverter Max Gourmet Herb Grinder Jaguar Herb Disks Maxine Gourmet Herb Grinder + Re-chargeable Battery Inflation Kit 10 Balloons, 10 X-tip Mouthpieces, 5 Matrix 5 Pack Of Water Tools 5 Pack of Matrix Tube Attachments 10 Pack Of Re-useable Empty Herb Disks Spa Mask 10 Pack Of X-tip Mouthpieces Digital Spa All Products Made By Vapir, Inc.
INFORMATION ON COMMON PLANTS USED FOR VAPORIZATION Herb/plant Part of the Plant Used For Vaporization Desired Temperature Chamomile Eucalyptus Hops Lemon Balm Lavender Sage Thyme Tobacco blossoms leaves cones leaves blossoms leaves herb leaves 265 ºF (129 ºC) 310 ºF (155 ºC) 375 ºF (191 ºC) 265 ºF (129 ºC) 290 ºF (144 ºC) 375 ºF (191 ºC) 375 ºF (191 ºC) 375 ºF (191 ºC) 90 DAY LIMITED WARRANTY Vapir ONE Vaporizer Phone: 800.841.1022 Website: www.vapir.com Email: customerservice@air-2.
Vapir One Available at Vape World INHALE THE FUTURE! VAPIR, INC. ALL RIGHTS RESERVED Vapir, Inc. www.vapir.
