Instruction Book

GETTING STARTED
GO TO VAPAMORE.COM TO SEE THE MR-1000 FORZA INSTRUCTIONAL VIDEO
FRONT & REAR WHEEL INSTALLATION
Install the rear wheels using the supplied tool along
with the supplied wheel bolts ,and washers. There is
Once unpacked the items that need to be installed are the front & rear wheels, storage
basket with upright handles, front carry handle and cord hooks. All the necessary tools
and hardware are included to install these items.
Fig.1
BASKET & HANDLE
Fig.2
The mesh tote basket is used for parts and accessories
and has two large carry handles so items can be carried
separate from the machine. There are also small hoops
located on the carry basket to hang on the U shape
handle. Slid the hooks located on the U shape handle
through the small hoops on the mesh tote basket to
hang. The U shape handle installs to the rear of the
machine by sliding into the brackets located on the rear
of the machine housing and then attaches to the
machine using the supplied thumb screws. (Fig.2)
Install the front wheels using the supplied tool along
with the supplied wheel bolts, and washers. There
are 4 bolts and 4 washers per wheel. (Fig.1)
CARRY HANDLES & CORD HOOKS
Attach the carry handles using the two supplied bolts for each handle, then tighten with
the supplied Allen tool. The cord hooks screw onto the studs located on the back of the
machine. Push inward to tighten the cord hooks. The cord hooks rotate by pulling
outward from the steamer then twisting to rotate. Use this rotate function to easily remove
the power cord and to position the hooks for cord storage. Use the Velcro cord strap to
secure the cord during transpor
t. (Fig.3)
Fig.3
Vapamore
!
!
the steam gun trigger down for 15-20 seconds to release the air trapped in the boiler.
Cord
Hook
Cord
Hook
Front Carry Handle
Top Carry Handle
Front Wheel x 4 Bolts
Wheel Bolt
Washer
Rear
Wheel
one bolt and one washer per wheel. The rear wheel
bolt threads into the wheel mount. (Fig.1)
Mesh
Tote
Basket
Tote
Basket
Hooks
Thumb
Screws
Handle
Brackets