Owner manual

‘
’
OPERATION
Fig. 17
Attach the oor cleaning head to the end of the
extension tube (use 1 to 3 tubes as desired). Ensure
that the oor cleaning head clicks into place. (Fig.13)
The oor cleaning head can be used with or without the
micro ber cloth depending on the surface to be
cleaned. Place the oor cleaning head on the micro
ber cloth and secure the overhanging material under
the clips located on left and right side of the oor
cleaning head. (Fig.14)
Fig.13
The oor cleaning head is ideal for tile, stone, vinyl, and
wood oors along with cleaning washable walls and
hard surfaces. It can also be used on carpet to sanitize,
deodorize, kill allergens, bedbugs and dust mites.
(Fig. 15) (Attach the micro ber cover to allow the oor
cleaning head to glide when using on carpet).
Fig.14
Fig.15
The detail adaptor can be attached directly to the steam
gun or to any of the extension tubes. (Fig. 16)
Fig. 16
The detail adaptor can also be used on its own as a
straight jet nozzle tool or along with the 90 degree jet
nozzle attachment. These tools are great for removing
soap scum in the bath, shower and around faucets. Also
for cleaning tight areas such as toilet hinges where high
pressure steam can reach and blow out dirt and debris.
This tool is most eective when applied direct to the
surface being treated. The steam temperature will
condense and cool within 1’’ of the jet tip. (Fig.18)
Fig. 18
Use on steam gun
or extension tube
Carpets
Hard oors
CLICK
ACCESSORIES / DETAIL ADAPTOR
Detail adaptor
90 Deg. jet nozzle
GO TO VAPAMORE.COM TO SEE THE MR-100 PRIMO INSTRUCTIONAL VIDEO
The detail adaptor is needed in order to use the brushes,
detail scraper clothes / fabric - smooth surface tool, and
the jet nozzle attachment. To attach any of these
accessories, Push the accessory onto the detail adaptor
aligning the arrow on the accessory with the arrow on
the detail adaptor. Twist the accessory on the detail
adaptor to lock into place. Remove in the reverse order.
(Fig.17)
The steam gun, extension tubes, and oor
cleaning head can be stored (as shown on the cover
page of this instruction manual) by inserting the tab on
the oor cleaning head into the slot located on the side
of the Vapamore.
!