STELLINA ST80 Instruction Manual v1.
Table of Contents I. Package contents.............................................................................................................................. 2 II. Product presentation........................................................................................................................ 2 III. Warnings......................................................................................................................................... 2 IV. Installation.......................
I. Package contents The original packaging contains the following elements: 1 Stellina telescope 1 tripod 3 tripod accessories (1 lot of ovoid rubber feet, 1 lot of spiked feet, clamping tools) We recommend that you keep your telescope's original packaging so that it can be used for storing the telescope when not in use. II. Product presentation Stellina is a new generation telescope: compact, intuitive, smart and connected.
- Stellina should never be pointed at the sun without an adequate filter placed on the lens. - When using an external power adapter, you are responsible for its proper use. You must therefore respect all the usage recommendations made by the manufacturer of the adapter. Vaonis can not be held responsible for any damage caused by a mains AC power supply. - External batteries used for powering Stellina must comply with French and European regulations.
2. Unfold the legs of the tripod and lock them in the desired position thanks to the integrated adjustment system. 3. Level the tripod by using the bubble level and adjustable legs. To do this, unscrew the rubber knobs, move in or out a leg at a time and then tighten each knob to fix the leg in position. 4. To make sure the tripod is stable, apply vertical pressure to the top of the tripod. If it does not move, you can go to the next step. If not, move the tripod and try again on more stable ground. 5.
Provide sufficient cable length to allow a 360° rotation of Stellina. A cable that is too tight could damage the connectors and/or the motorization of the instrument. Make sure that the power cable can not get caught on any external elements. For increased security concerning the electrical connection, make sure that the external power adapter can not come in contact with liquids or other conductive elements. External battery (not supplied): Case 1: The external battery fits in the battery compartment.
Note: If the button does not light up, check the power connection. To do this, disconnect and reconnect the power cable. If a red light comes on for 5 seconds, try starting the instrument again. If nothing happens, the power supply is faulty. Connecting to Stellina Once switched on, Stellina creates its own Wi-Fi network. To connect, first download the "Stellinapp" app from the App Store or Google Play. Go to www.vaonis.com to find the list of compatible devices.
The telescope should be stored in a clean, dry place. If moisture is present on the instrument, it is recommended to let it dry before storing it in its box to prevent the risk of mold growth. VIII. Technical characteristics General Weight Dimensions (H x W x D) Operating temperature Power supply Battery life Image processing Polar alignment Accessories included Control Device connection Mobile application External devices Stargazing Warranty 11.2kg (24.7 lbs) 48.5 x 38.5 x 12.
IX. Warranty Vaonis warrants that the necessary precautions have been taken in the design and manufacture of this material. Vaonis warrants that the telescope will be free from material and manufacturing defects for a period of two years from the date of delivery of the equipment. Vaonis will repair or replace this product or a part of it when it has been determined, following a diagnosis with the Vaonis support service, that the product is defective due to a material or manufacturing defect.
This equipment has been tested and found to comply with the limits for a Class B radio device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
