Quick Guide

8
4. More functions
4.1. Lock and Switch screen
The lock screen function can be enabled by pressing the lock screen button
when the equipment works normally. At the same time, "Locked Screen" will be
shown on the display screen. To restore the normal display by pressing the lock
button again.
This product supports the multi-user scenarios that a Vpixel_R works with
the several Vpixel_S. Under this circumstance, the connection of one of the
Vpixel_S and the Vpixel_R is normal while the other Vpixel_S are in a waiting
state.
It only needs to press the "switch key" of the Vpixel_S and the display
terminal will switch to the signal source image which is connected to the
Vpixel_S. It supports up to 8 Vpixel_S.
4.2. Hibernate and Awake
The Vpixel_R will be in a hibernate status if there is no signal access after 15
minutes and the Vpixel_R indicator light will be off, the HDMI output will be
closed.
When the Vpixel_R is in a hibernate status, only the wireless module keeps
working. If any Vpixel_S or mobile connecting is detected, the Vpixel_R will be
awake from the hibernate and restore to the normal state.