Installation Manual

FAST INSTALLATION TIPS
Step 1:Measure the distance between two supports of the backside.at
the back.(see pic.1)
Step 2:Drill holes in the wall for the two brackets according to the
distance that you have measured in the first step.
Step 3:Insert plastic pegs,then screwing the screws into the plastic pegs
while holding the bracket.(see pic.2)
Step 4:Assemble the shower holder,hand shower,top rain shower and connect with the main
body.(see pic.3)
Hand shower Top rain shower
Step 5:Mount the shower panel with attach shower hose onto the wall.
Step 6:Connect the hot and cold water pipes properly.