2-Serial/1-Parallel Port PCIe Adapter User Manual Model: UGT-PCE2S1P All brand names and trademarks are properties of their respective owners www.vantecusa.
Contents Features and Benefits.........................................................3 System Requirements ........................................................4 Package Contents...............................................................4 Hardware Installation ........................................................4 Driver Installation ..............................................................
Features and Benefits Features Compliant with PCI Express Base Specification 1.1 Supports 2 x UART serial port Built-in 16C450/550 compatible UART On chip 256 byte FIFOs in transmit and receive path of each serial port Serial data transfer rate up to 230400bps Supports Standard Parallel Port (SPP), Enhanced Parallel (EPP) & Enhanced Capability Port (ECP) Parallel data transfer rate up to 1.
System Requirements Windows® XP/Vista/7/8 (32/64 bit) PCI Express-enabled system with an available PCI Express slot Package Contents 1 x 2-Serial/1-Parallel Port PCIe Adapter 1 x Bracket with two DB9 male serial ports 3 x Low profile brackets 1 x User Manual 1 x Driver CD Hardware Installation 1. Turn off the power to your computer. 2. Unplug the power cord and remove your computer’s cover. 3. Remove the screw and slot bracket from an available PCIe slot. 4.
6. Replace the computer cover and reconnect the power cord. Driver Installation 1. Insert the provided CD into your CD-ROM drive. 2. At the Windows Desktop, click Start, and then Run. 3. When the prompt displays For Windows XP/Vista/7/8 32-bit – Enter “D:\UGT-PC2S1PE\Windows\32Bit\stnsetup.exe” (where “D” is the designation of your CD drive) For Windows XP/Vista/7/8 64-bit – Enter “D:\UGT-PC2S1PE\Windows\64Bit\stnsetup.exe” (where “D” is the designation of your CD drive) 4.
