User Manual Model : NST-D 100 S2 www.vantecusa.com All Registered Trademarks Belong To Their Respected Companies. SATA to USB 2.0 Copyright © 2009 Vantec Thermal Technologies. All Right Reserved.
■ Content Content ........................................................................................................................... .1 1.Introduction ............................................................................................................. .2 2.System Requirements ........................................................................................ .2 3.Specifications/Features............................................................................. .3 4.Installation....
1.Introduct 1.Introduction The Vantec NexStar Hard Drive Dock is a complete and easy way to add or swap hard drives to your computer. It gives you the flexibility of connecting any SATA I/II hard drive to your computer via USB 2.0 connection without opening up your computer case or installing into an enclosure. Simply just insert any 2.5” or 3.5” SATA I/II hard drive into the NexStar Hard Drive Dock and you are ready to transfer, copy, or backup files.
3.Specifications/Features Features： ■ Install And Access Hard Drive in Seconds. ■ Simple to Use Design; No Need to Add Enclosure or Open Case. ■ Eject Button for Easy Removal of Hard Drive. ■ Supports 2.5"/3.5" SATA I/II Hard Drive Up to 1.5 TB. ■ Add Storage to Any System with USB. ■ Plug & Play. ■ Attractive Blue LED Power & HDD Activity Light. ■ Transfer Rates Up to 480Mbps w/USB 2.0.
4.Installation 1. Connect the power adapter to the NexStar Hard Drive Dock. 2. Connect the USB Cable to the NexStar Hard Drive Dock and attach the other end to your computer. Power Cable USB 2.
3. Insert 2.5” or 3.5” SATA hard drive (HDD) into the slot.
3-1. When the eject button is upright, the NexStar Hard Drive Dock is ready for use.
5.Removal Warning, please push power button & turn off unit before removing the hard drive! 1. Remove the HDD safely from your computer system. 2. Push down the button to eject the HDD. (Stablize the HDD with your hand).
3. Remove the HDD from the Hard Drive Dock.
6.Driver Installation Windows ME/2000/XP/VISTA No drivers are necessary when using Windows ME/2000/XP/VISTA. If the hard drive does not appear under My Computer, be sure to partition your hard drive. Mac OS 9.0 or later No drivers are necessary when using Mac OS 9.0 above. If the hard drive does not appear on the desktop, be sure to partition your hard drive. Mac OS 8.6 1.Unplug the NexStar Hard Drive Dock if you currently have it connected. 2.USB Mass Storage Support 1.3.
7. Warranty The NexStar Hard Drive Dock comes with a 1 year limited warranty (90 day parts). If your unit become defective within that time frame, please go to http://www.vantecusa.com for information on how to receive warranty exchange or repair. Cosmetic defects and missing parts are not covered under this warranty. Please check the contents of the unit to make sure you received all parts. Also, check for any cosmetic flaws.
