7-Port USB 2.0 & FireWire 400 Combo PCI Host Card User Manual Model: UGT-UF100 All brand names and trademarks are properties of their respective owners. www.vantecusa.
Features and Benefits z Combo design adds four USB 2.0 (480Mbps) and three FireWire (400Mbps) ports into your system z Hot-swapping feature allows you to connect/disconnect devices without first turning system off USB 2.0 interface: z z Compliant with USB specification rev. 2.0 Supports high-speed (480Mbps), full-speed (12Mbps), and low-speed(1.5Mbps) data transfer modes for simultaneous operation of multiple USB 2.0/1.
Package Contents z 1 x 7-Port USB 2.
Hardware Installation 1. Turn Off the power to your computer. 2. Unplug the power cord and remove your computer’s cover. 3. Remove the slot bracket from an available PCI slot 4. To install the card, carefully align the card’s bus connector with the selected PCI slot on the motherboard. Push the board down firmly. 5. Connect the system power source to the board’s power connector. 6. Replace the slot bracket’s holding screw to secure the card.
7. Replace the computer cover and reconnect the power cord. Driver Installation For Windows® XP/2000 Windows® 2000/XP will automatically detect and install the correct driver for the PCI USB 2.0 & IEEE 1394a Combo. However, please ensure you have the latest Service Pack Installed. For Windows® XP z Windows® XP Service Pack 1 or later For Windows® 2000 z Windows® 2000 Service Pack 4 or later For Windows® Server 2003/Vista Windows® Server 2003 has built-in driver support for this controller.
To Verify Windows Installation 1. Right click My Computer, then click Manage. Click Device Manager. 2. Double click IEEE 1394 Bus host controllers option and a VIA OHCI Compliant IEEE 1394 Host Controller should be displayed 3. Double click Universal Serial Bus controllers option. - USB Root Hub (USB 2.
UGT-UF100 Page 7
