Installation manual
www.fmiproducts.com
123502-01E18
INSTALLING LOG SET AND SCREEN
1. Remove log packaging material and discard
packaging. Gently place log over burner (see
Figure 24). Do not allow log to contact ame. If
ame contacts log, soot will be created.
2. Reattach screen by placing notches in
screen frame over shoulder screws and
pushing down.
INSTALLATION
Continued
Log
Shoulder
Screw
Screen
Figure 24 - Installing Log and Screen
OPERATION
THERMOSTAT-CONTROLLED MODELS
-
Force or attempted repair may result in
the appliance and to replace any part of
LIGHTING
INSTRUCTIONS
WARNING: You must operate
screen is installed before run-
1. STOP! Read the safety information start-
ing in column 1.
FOR YOUR SAFETY
READ BEFORE LIGHTING
WARNING: If you do not fol-
low these instructions exactly,
-
the pilot, follow these instructions
WHAT TO DO IF YOU SMELL GAS
If the knob will not push in or turn by










