Installation manual

System Operation Description
5-23
Copyright

2001 Phone: [phone] RE-4500
Vanner Inc. FAX: [phone] Installation Manual
4282 Reynolds Dr. www.vanner.com Rev 10d
Hilliard Ohio 43026 RE Owners_Manual_Rev10d D99988
INCORPORATED
INCORPORATEDINCORPORATED
INCORPORATED
You are now at the first item in the INVERTER Menu.
The Inverter Menu structure is shown in Figure 5-3:
Inverter Menu.
As you can see, you have options of where to go from
here!
4.
Press the ESC key. This will take you back to the
SETTINGS Menu. The Display should look like the
following:
Inverter
on OFF
5.
Press the ESC key again. This will take you back to the
Main screen shown below:
SETTINGS ALARMS
ADVANCED HELP
This returns you to the Main Menu.
Congratulations! You now know how to navigate the
menus!
Note:
In order to prevent settings that might cause damage to personnel, or
property, the RE-4500 has been equipped with password protection
to avoid any wrong entry of data.
The RE-4500 is shipped with the following configuration:
•
User
– (7734) This level of access allows viewing of all
the menu items and some limited adjustment of
parameters, but no adjustment to the more advanced
parameters. Changes are limited to the “Settings” Menu.
For further information on menu items please refer to
Appendix B: RE-ICC Menus. This section has the complete
menu structure for the RE-ICC.
Warning
Changes to the menu items at any level but the user should only be
done by Vanner Authorized personnel. Failure to follow proper
procedures and configurations can lead to death, explosion,
electrocution, loss of property and equipment, and voiding of
warranty!