Installation manual

RE Owners Manual
5-16
Copyright

2001 Phone: [phone] RE-4500
Vanner Inc. FAX: [phone] Installation Manual
4282 Reynolds Dr. www.vanner.com Rev 10d
Hilliard Ohio 43026 RE Owners_Manual_Rev10d D99988
INCORPORATED
INCORPORATEDINCORPORATED
INCORPORATED
Selecting a displayed item, decreasing (decrementing)
display items, selecting an “OFF” or “NO” function.
•
Menu Key
If a Menu is available for a displayed item, this key when
depressed moves the display to the new menu.
An additional feature of the
LCD
(
L
iquid
C
rystal
D
isplay)
version of the RE-ICC is a contrast control. By holding down
the
ESC
key and pressing either the
Top Right Key
(to make
the display lighter) or the
Bottom Right Key
(to make the
display darker), the contrast can be adjusted.
Note:
This adjustment for the contrast only works with the LCD type
display! The VFD (Vacuum Fluorescent Display) is unaffected by
this control.
Moving Around the RE-ICC Menus
First, “Don’t Panic”!
Moving around the Inverter/Charger Controller can be a little
difficult at first, but with a little practice, it will become very
easy! This section contains examples to help the first time user
figure out how to enter data and move around the menus.
WARNING:
This Section contains examples to help the user get started with the RE-
4500 system. It is assumed that the Inverter has been properly installed at
this point. If the RE-4500 has not been installed, have a qualified (Vanner
Certified) installer perform the installation of the RE-4500 before
proceeding.
Note:
The example settings shown below are for the RE24-4500. The settings for
the RE48-4500 are designated by (
Bold Italics in Parentheses
)
The RE-ICC Menus consist of the following Menus:
Main Menu
Root Menu, this is the start menu from
which everything can be accessed.
Display Menu
Displays status, voltages, current,
frequency, etc.