Installation manual

RE Owners Manual
3-2
Copyright

2001 Phone: [phone] RE-4500
Vanner Inc. FAX: [phone] Installation Manual
4282 Reynolds Dr. www.vanner.com Rev 10d
Hilliard Ohio 43026 RE Owners_Manual_Rev10d D99988
INCORPORATED
INCORPORATEDINCORPORATED
INCORPORATED
These symbols are used to note procedures that if not closely
followed could lead to loss of life or damage to equipment or
property due to electrocution.
Electrocution hazard exists
Fire hazard exists
A potentially dangerous
condition
Explosive hazard exists
Corrosive hazard exists
The following are additional symbols used in identifying other
aspects of the RE-4500.
AC
This symbol denotes AC Voltage is
potentially present on this termination.
DC Voltage
This symbol denotes DC Voltage is
potentially present on this termination.
L1
Phase 1
This symbol denotes that this termination
is used for the upper phase of a 240 Vrms
3 wire system consisting of Phase 1
(Black wire), Neutral (White wire), and
Phase 2 (Red wire).