Installation manual

RE Owners Manual
2-6
Copyright

2001 Phone: [phone] RE-4500
Vanner Inc. FAX: [phone] Installation Manual
4282 Reynolds Dr. www.vanner.com Rev 10d
Hilliard Ohio 43026 RE Owners_Manual_Rev10d D99988
INCORPORATED
INCORPORATEDINCORPORATED
INCORPORATED
Parts and Accessories
Part
Number
Name Description
RE-ICC/LCD Remote Display Inverter/Charger Controller – changes and
displays the programmable settings inside the
RE-4500.
RE24-4500S 24V RE-4500 with a
Small Inverter Board
This option enables greater efficiency when the
inverter is providing power for a light load (less
than 75 watts).
RE-ACM AC Control Module Includes most requirements for utility, load,
bypass, and AC generator connections, breakers,
and switches in a convenient assembly.
RE-DCM
Models:
RE48-DCM
RE24-DCM
DC Control Module Includes most requirements Solar, Battery,
Auxiliary DC Loads, Charge Controllers,
Disconnects, and connections for the DC source
and loads in a convenient assembly.
RE-BTS1 B/T Sensor Battery Temperature Sensor – an optional sensor
available to more accurately monitor the
condition of batteries in the system.
RE-SLM
Model:
RE48-SLM
Sun Lynx Module Configures the system for “battery-less
operation”. This module is used to connect to
the Solar Array instead of the RE-DCM used in
a Battery populated system.