Installation manual

Specifications and Features
2-5
Copyright

2001 Phone: [phone] RE-4500
Vanner Inc. FAX: [phone] Installation Manual
4282 Reynolds Dr. www.vanner.com Rev 10d
Hilliard Ohio 43026 RE Owners_Manual_Rev10d D99988
INCORPORATED
INCORPORATEDINCORPORATED
INCORPORATED
Standard Features
•
True sine wave single phase 3 wire 240 V
RMS
output.
•
Unity Power Factor Corrected Battery Charger for less AC
Input Distortion, accommodating Lead Acid, Flooded-Cell,
GEL, and AGM types of batteries.
•
True single phase three wire 240V
RMS
output that can be
used with Multiwire branch circuits, without needing the
load rewiring (required by many single phase inverters).
•
Total harmonic distortion less than 5% for all loads up to
the Surge Output Rating.
•
Reliable electronic protection designed to handle output
short-circuits and output overloads.
•
Terminal block for hardwiring the AC outputs.
•
Automatic shutoff for low or high battery voltage,
overload, or over-temperature.
•
Relay Output circuits, providing Normally Open (NO) and
Normally Closed (NC) control for activating external
devices and alarms.
•
Indicator lights for Inverter, Temperature, Battery,
Generator, and Utility status.
•
Thermostatically controlled cooling fan.