Owner`s manual

Component Identification and
Description of Operation
IT SERIES Industrial True Sine Wave Inverter Owners Manual
16
9-POSITION
TERMINAL BLOCK
+5V
GND
No
connection
No
connection
INTERNAL
FUNCTION
POWER-ON
LED
REMOTE
ON/OFF
SWITCHES
AUTO
THROTTLE
LOW DC
WARNING
1
2
3
4
5
6
7
8
9
(26) Mounting Brackets ( 2 )
(27) Air Exhaust Vents
(28) Side entry for negative DC input cable
(29) Side entry for positive DC input cable
(30) Positive DC Input Contact
(31) Negative DC Input Contact
(32) Remote Control Terminal Block
A 9-position terminal block is provided for connecting optional, customer supplied remote control
and remote display wiring. Please note that any wiring to this terminal block is optional.
Figure 6 Remote Control Terminal Block
_____________________________________________
Terminals 1,2 and 3
Remote Switch terminals.
See item (32.1) and Figure 7.
_____________________________________________
Terminals 4 and 5
Remote ‘Inverter ON' LED.
See item (32.2).
____________________________________________
Terminal 6
(Volt Guard Feature) Provides
ground control based on battery
voltage. See item (32.3) & Fig 8.
_____________________________________________
Terminal 8
Provides ground control for a
remote Low Battery Warning
Device. See item (32.5) & Fig 9.
_____________________________________________
Terminal 7 and 9
Terminals 7 and 9 are
NOT USED
.