Users Manual

32
LOVE YOUR BIKE
Your S3 or X3 is tted with an enclosed
chainguard to protect it from dirt. In the rare
case where dirt goes inside, remove the
chainguard and clean the chain by rubbing it
with an oily cloth. It also comes with a chain
tensioner that is designed to ensure the
chain doesn’t need to be tensioned during
the rst 2 years after purchase.
Clean your bike frame using water and
gentle detergent. We do not recommend
using pressure washers, as this can damage
the internal electronics.
It’s very important that all bolted connections
are secured with the correct torque.
Component
Stem clamp - handlebar
Headset stop-screw-handlebar
Seat clamp frame screw
Seat/saddle angle screw
Front wheel axle
Rear wheel axle
Motor cable cap
Pedals
Torque
7Nm
6Nm
10Nm
10.5Nm
30Nm
30Nm
2Nm
40Nm
Chain guard and cleaning
Too much torque can damage the screw, nut
or component. Always use the supplied
torque spanner to tighten screw joints.
Screw connections