FIND YOUR F I T 1. Saddle adjustment 1.1 When properly adjusted, the saddle should be on hip height, or check if your knee forms a 90° angle at the top of the pedal motion, straightening out when your foot reaches the bottom.
FIND YOUR F I T 1.2 Adjust the saddle height by inserting 1.3 Make sure you don’t exceed the anti-theft Torx key T30 and turning it clockwise. You can then slide the seat post up and down. maximum saddle height, indicated on the seat post. X3 max. height: 170mm S3 max. height: 140mm Torx key T30 1.4 Change the saddle position by inserting anti-theft Torx key T30 into the two openings. Loosen both bolts, and then slide the seat to your preferred position.
FIND YOUR F I T 2. Adjusting the handle bar height 2.1 First, loosen the bolts on the side of the handlebar using the Allen key #5. Allen key #5 2.2 Lift it up to the top of the internal stem, then tighten one of the bolts to keep it in position. Be careful to not detach the handlebar completely. Allen key #5 2.3 Place together enough spacers to raise A the handlebar to your preferred height (A). Then slide them down (B).
FIND YOUR F I T 2.4 Loosen the bolt (C) and gently slide the handlebar down (D). C D 2.5 Check that the height for comfort, and make sure the stem is in line with the front wheel (E). Tighten both bolts to secure the handlebar position (F).
Love your bike Our bikes are built to last, but they still appreciate a little maintenance every now and then.
LOVE YOUR B I K E Bike basics These two simple tips will keep your bike riding happier, for longer. Pump your tires You’ll be 15% more energy-efficient by keeping 3,0 Bar (35 Psi) of air pressure in your tires. Recommended tire inflation pressure: 2.5- 5 Bar / 35-70 Psi. Lubricate your chain Apply a little lube to your chain every now and then to keep it running smoothly.
LOVE YOUR B I K E Chain guard and cleaning Clean your bike frame using water and gentle detergent. We do not recommend using pressure washers, as this can damage the internal electronics. Your S3 or X3 is fitted with an enclosed chainguard to protect it from dirt. In the rare case where dirt goes inside, remove the chainguard and clean the chain by rubbing it with an oily cloth.
LOVE YOUR B I K E Replacing parts In the certification process, specific components are defined which are allowed to be used on your VanMoof. In other words the certification only applies if your vehicle uses these parts or replacement parts that have been approved for your model. If parts are replaced by the user, only original parts or replacements, approved for this bicycle model by VanMoof, may be used. Otherwise the user needs to seek individual permission from local regulatory authorities.
LOVE YOUR B I K E Warranty VanMoof guarantees each new bicycle frame against defects in workmanship and materials for two years. All original components are also covered by warranty for a period of one year from the date of purchase. This warranty is expressly limited to the replacement of a defective frame, or defective parts and is the sole remedy of the warranty. This warranty applies only to original owners and is not transferable.
LOVE YOUR B I K E WARNING Never ride in a situation where you are not able to fully control the bike. WARNING Take care when riding in wet and slippery conditions. Ride slowly and gently apply force to the brakes to accommodate a longer stopping distance. WARNING Ride at an appropriate speed, in accordance with the terrain, your riding capabilities and local government regulations. Make sure you choose the speed settings for your country when installing the app.
WARNING:Federal Communications Commission (FCC) Statement 15.105(B) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
