Specifications

046-08OP-001D S/N 046050010021 - UP

Figure 45: Filter locations

Figure 46: Filter location

(1) Transmission oil filter

(2) Hydraulic system filter

(3) Hydraulic Tank filler cap

(4) Case drain filter pipelayer

3. Remove filter (1, 2, and 4).

Note: Remove case drain hydraulic filter (1). Discard the used filter. Filter (1) must be removed for access to hydraulic

system filter (2). Replace both of the filters at the same time.

4. Inspect the seal on the filter housings for filter (1, 2, and 4). If the seals are damaged or worn, install new seals.

Install a new filter element into the filter housing for (1, 2, and 4).

035-60-64-001

046-11-60-002A