Specifications

046-08OP-001D S/N 046050010021 - UP
33
Counterweight Cylinder Bearings – Lubricate
Figure 36: Counterweight cylinder bearings fittings location
Figure 37: Counterweight cylinder bearings location
There are two grease fittings for the counterweight cylinder.
1. Extend the counterweight and lock the counterweight into position.
Refer to the Operation and Maintenance Manual, “Counterweight Lock Lever” for the proper procedure to lock the
counterweight into position.
2. Lubricate the upper grease fitting that is located in the head end of the cylinder.
3. Lubricate the grease fitting that is located in the rod end of the cylinder.
4. Follow the procedure to unlock the counterweight and retract the counterweight.
5. Follow the procedure to unlock the counterweight and retract the counterweight.
035-60-68-001
035-60-68-002
035-05-05-019B