Specifications

046-08OP-001D S/N 046050010021 - UP
24
1. Lower the boom enough to remove the load blocks and the sheave block.
Figure 26: Removal of boom, steps 1, 2
2. Remove cotter pin, the retainer, and pin (1). Lower the load block and the hook block to the ground.
The approximate weight of the load block is 88 kg (194 lb). The approximate weight of the hook block is 100 kg
(220 lb). The combined weight of the load block and the hook block is approximately 188 kg (414 lb).
3. Replace the pin (1) in the boom. Fasten the load block and the hook block to the machine for shipping as illustrated
below. Draw in the excess hook load line.
Figure 27: Fastening of Load Blocks for Transport
4. Remove pin (6) and insert stowing-link (4) into bumper pocket (7) and reinstall pin (6).
5. Place hook load line over guide (5).
6. Slowly draw in the excess hook load line, when the load block and hook block are suspended by the load line,
swing in the load block and hook block and lock into stowing- link (4) and tighten up the load line, being careful
not to kink or damage load cable.
035-30-71-004A
035-30-71-012A
4
7 6
5
4
5
6
2
1
035-20-30-007A
LOAD
BLOCK
HOOK
BLOCK
LUFF
BLOCK