Specifications

046-08OP-001D S/N 046050010021 - UP
15
Lifting Capacities
The machine may tip and personal injury may occur if the maximum load capacities are exceeded. Load capacities
assume that the machine is stationary on a level concrete surface with the counterweight extended. Lift capacities will
decrease on slopes or soft ground.
Figure 17: Lift capacity chart
NOTE: Do not exceed the lifting capacity that is shown in the chart in illustration above.
The lift capacity chart is located on the right hand winch-guarding to the front of the controls. The lift capacities are based
on a stationary machine with the following specifications:
D
C
A
The following are as per
ANSI/ASME B30.14, ISO 8813:
1992:
(A) Load capacity
(Y) Load overhang
(C) Rated tipping load lift capacity
(D) Working range
Figure 16: Lifting Capacities