Specifications

046-08OP-001D S/N 046050010021 - UP
14
Specifications
Figure 15: Standard shipping specifications, height and width
VP 72T Pipelayer
Approximate operating weight of
the standard machine
1
28894 kg (63700 lb)
Approximate shipping weight of
the standard machine
2
28009 kg (61750 lb)
Weight of the 20 ft boom, the
boom sheave blocks, and the load
blocks
936 kg (2064 lb)
[24 ft boom add 286 kg (630 lb)]
Height of the machine without
the boom (A)
3214 mm (10-feet 6-5/8-inch)
Length of the machine (B)
4498 mm (14-feet 9-inch)
Width of the machine without
the boom (C)
3725 mm(12-feet 2 1/16-inch)
Height of the machine with the
20 ft boom
6859 mm (22-feet 6-inch)
[24 ft boom add 1222 mm (48-1/8 inch)]
Ground clearance of the machine
433 mm ( 1-foot 5-inch)
Table 2: Specifications
Intended Use
This machine is a Pipelayer that is described in ISO 6165:2001. The machine is intended to perform the following functions:
lift, handle, and lay down pipe with a side mounted boom.
Restrictions to Application and Configuration
The maximum lift capacity is 40820 kg (90,000 lb).
The maximum fore and aft slope is 45 degrees or a 100 percent grade for the proper lubrication of the pipelayer components.
Refer to the tractor operation and maintenance manual for additional restrictions.
1
Operating Weight: Includes lubricants, coolant, 100% fuel, hydraulic controls and fluids, backup alarm, seat
belt, 660 mm (26 in) single grouser shoes, drawbar, counterweight, boom and pulley blocks and cable, and
operator.
2
Shipping Weight: Includes lubricants, coolant, 10% fuel, hydraulic controls and fluids, backup alarm, seat belt,
660 mm (26 in) single grouser shoes, drawbar, counterweight, and pulley blocks and cable.
A
C
035-05-05-002A
035-05-05-021A
B