Specifications

046-08OP-001D S/N 046050010021 - UP
9
046-00-05-001
Figure 13: Operator's Field of View as per ISO 5006:2006
The operator is required to survey his/her field of vision when operating the machine.
The operator shall take notice of the areas of no visibility located at the front and front left of the machine (see figure)
The right-hand overhead mirror shall be adjusted so that a person walking 1m to the right of the machine, for the length L,
can be seen in a length of at least 200mm either directly or indirectly at every position (see figure).
The side view mirrors shall be adjusted so the operator is comfortable with his/her vision to the rear of the machine.
Examples of job site organization include the following:
• Safety instructions
•
Operator training
• Controlled patterns of machine movement
•
Warning symbols or warning signs on machines or on vehicles
• Controlled patterns of vehicle movement
•
A system of communication
• Restricted areas
•
Communication between workers and operators prior to
approaching the machine