Instruction Manual

DIGITMR S2 USER’S MANUAL REV 1

1. INTERNAL DIRECTORY

Press the [1] key (INTERNAL DIRECTORY) to print a directory of test shots stored

in the unit’s EEPROM. Continue to step e.

2. THUMB DRIVE DIR

Press the [2] key (THUMB DRIVE DIR) to print a directory of test shots stored on

a connected USB Flash drive. The directory will be printed on the unit’s built-in

thermal printer and you will be returned to the “START-UP” menu. A typical

thumb drive directory printout is shown in Figure 22.

e. The following screen will be displayed:

Press the [1] key (SHORT DIRECTORY).

NOTES

• If the SHORT DIRECTORY option is selected, the DigiTMR S2 will print the

shot numbers and header information of the last ten timing shots stored

in the EEPROM.

• If the FULL DIRECTORY option is selected, the DigiTMR S2 will print the

shot numbers and header information of all timing shots stored in the

EEPROM.

• A typical shot directory printout is shown in Figure 23.

f. The following screen will be displayed while the directory is being printed:

When printing has finished, you will be returned to the “START-UP” menu.

PRINTING ABBREVIATED