Manual

CT-7000 S3 USER’S MANUAL REV 1

d. The following screen will be displayed:

Press the

[1] key (CREATE NEW SETUP).

e. The following screen will be displayed:

Press the

[1] key to enter the transducer travel distance per volt using English units (in

inches per degree), or press the [2] key to enter the transducer travel distance per volt

using Metric units (in millimeters per degree).

f. The following screen will be displayed:

Move the transducer to the reference position and press the

[ENTER] key.

g. The following screen will be displayed:

Move the transducer a known distance and press the [ENTER] key.

MOVE RES ENCODER TO

KNOWN DISTANCE

ENTER TO CONTINUE

MOVE RES ENCODER TO

REFERENCE POSITION

"ENTER TO CONTINUE"

RESISTIVE ENCODER:

1. ENGLISH (IN./DEG)

2. METRIC (MM/DEG)

RESISTIVE ENCODER:

1. CREATE NEW SETUP

2. LOAD SETUP

3. PRINT SETUP DIR