Manual

CT-7000 S2 USER’S MANUAL REV 2
37
Type the desired value using the numeric keypad. You can press the [CLEAR] key
to reset the value to 0.000 In/Deg. Press the [ENTER] key to save the new value.
You will be returned to the “START-UP” menu.
2. METRIC (MM/deg)
Press the [2] key to enter the rotary encoder linear distance per degree using Metric
units. The following screen will be displayed:
Type the desired value using the numeric keypad. You can press the [CLEAR] key
to reset the value to 0.000 MM/Deg. Press the [ENTER] key to save the new value.
You will be returned to the “START-UP” menu.
MM/DEGREE
12.70 MM/Deg