Manual

ATRT-03, ATRT-03A, AND ATRT-03B USER’S MANUAL REV 7

e. The following screen will be displayed:

1. ENTER PLAN NUMBER

Press the [1] key (ENTER PLAN NUMBER) if you know the test plan number that

you would like to print. The following screen will be displayed:

Type the test plan number using the alpha-numeric keypad and then press the

[ENTER] key. The test plan will be printed on the built-in thermal printer and

you will be returned to the “START-UP” menu. Please see Figure 23 for a sample

test plan printout.

2. SCROLL TO SELECT

Press the [2] key (SCROLL TO SELECT) to select a test plan by scrolling through

the test plan directory. The following screen will be displayed:

Press either the [PAPER ∧ Contrast] or [PAPER ∨ Contrast] key to scroll

forward or reverse through the test plan directory. The test plan header will be

displayed:

Continue to press the

[PAPER ∧ Contrast] or [PAPER ∨ Contrast] key

until you have located the test plan you would like to print, and then press the

[ENTER] key. The selected test plan will be printed and you will be returned to

the “START-UP” menu. Please see Figure 23 for a sample test plan printout.

1 Y-DELTA TAPS:20

Siemens

TEST PLAN DIRECTORY

“UP” TO SCROLL FWD

“DWN” TO SCROLL RVS

PRINT TEST PLAN

NUMBER:

PRINT TEST PLAN

1.ENTER PLAN NUMBER

2.SCROLL TO SELECT