Manual

REV 7 ATRT-03, ATRT-03A, AND ATRT-03B USER’S MANUAL
34
Type the H winding name plate voltage value using the numeric keypad. The
screen will be updated as shown below:
Press the [ENTER] key.
The following screen will be displayed:
Type the X winding name plate voltage value using the numeric keypad. The
screen will be updated as shown below:
Press the [ENTER] key. Continue to step d.
2. NO
Press the [2] key (NO) if you do not want to enter the transformer name plate
voltage values. Continue to step d.
d. The following screen will be displayed:
Press the [START] key to initiate the test.
e. The following screen will be displayed while the test is being performed:
SINGLE PHASE XFORMER
PLEASE WAIT
TEST IN PROGRESS
SINGLE PHASE XFORMER
“START” TO RUN TEST
OR
“STOP” TO ABORT
ENTER X WINDING
NAME-PLATE VOLTAGE:
240 V
ENTER X WINDING
NAME-PLATE VOLTAGE:
V
ENTER H WINDING
NAME-PLATE VOLTAGE:
2,400 V