Instruction Manual

REV 1 ATRT-01/01B S3 USER’S MANUAL

3.7 Working With Test Records

3.7.1. Viewing the Contents of the Working Memory

Whenever a test is performed or a test record is retrieved, the data is stored in the ATRT’s

working memory. You can view the test data using the steps below:

a. Start from the “START-UP” menu:

Press the [2] key (SETUP).

b. The following screen will be displayed:

Press the [3] key (PRINT RECORD).

c. The basic test record information will be displayed as shown:

Press the

[Contrast ∨] key. The test record details will be displayed as shown below:

Press the [STOP] key to return to the “START-UP” menu.

1 SINGLE PHASE

40 volts

RATIO ma %DIFF

1.003 0002 0.3

SINGLE PHASE

Num Tests: 1

05/26/11 15:33:58

1. RECORD ID

2. TEST VOLTAGE

3. PRINT RECORD

4. SAVE/RESTORE RECORD

5. SET TIME

6. SET LANGUAGE

1. TEST TRANSFORMER

2. SETUP

3. CALCULATOR

time: 14:21:34

date: 05/24/11