Instruction Manual

ATRT-01/01B S3 USER’S MANUAL REV 1

Type the X winding name plate voltage value using the numeric keypad. The

screen will be updated as shown:

Press the [ENTER] key. Continue to step f.

2. NO

Press the [2] key (NO) if you do not want to enter the transformer name plate

voltage. Continue to step f.

3. USE PREV DATA

Press the [3] key (USE PREV DATA) to use the name plate voltage values entered

when performing the last test. Continue to step f.

f. The following screen will be displayed momentarily:

Then the following screen will be displayed showing the Phase A cable connections for

the selected test (this will differ depending on the test selected):

PHASE A

CABLE

XFMR

X1,X2 to x1,x0

h1,h2 to h1,h3

"START" when READY

TESTING AT 40 VOLTS

NAME PLATE VOLTAGE:

H : X

500 : 10

NAME PLATE VOLTAGE:

H : X

500 : 0