Instruction Manual

ATRT-01/01B S3 USER’S MANUAL REV 1

3.5 Setting the Frequency (ATRT-01B S3 Only)

Follow the steps below to set the preferred frequency (50 or 60 Hz):

a. Start from the “START-UP” menu:

Press the [2] key (SETUP).

b. The following screen will be displayed:

Press the [7] key (SET 50/60 HZ).

c. The following screen will be displayed:

Select the preferred frequency by pressing the corresponding key on the keypad (

[1] or

[2]). The frequency will be set and a confirmation screen will be displayed as shown

below:

Press any key to return to the “START-UP” menu.

60 hz set

1. 60 Hz

2. 50 hz

1. RECORD ID

2. TEST VOLTAGE

3. PRINT RECORD

4. SAVE/RESTORE RECORD

5. SET TIME

6. SET LANGUAGE

7. SET 50/60 HZ

1. TEST TRANSFORMER

2. SETUP

3. CALCULATOR

bAT:

time: 14:21:34

date: 05/24/11