User manual

9
1.1 MODULE IDENTIFICATION
Vanguard SC
The module identification label can be found on the bottom of your Vanguard SC device. This label contains the product
part number, the serial number, FCC and IC IDs as well as carrier specific information that will be required when activating
your data account.
CDMA module identification labels contain the device ESN numbers. This number is required by your cellular carrier when
activating your data contract. The ESN number is provided in both decimal and Hex formats. The format required for
activation is carrier dependent.
GSM module identification lables contain an International Mobile Equipment Identity (IMEI) number shown in decimal
format. This number is used by the GSM network only to identify and validate the device. It has no permanent or semi-
permanent relation to the subscriber.
Figure 1: CDMA Module Idenficiation Label
Figure 2: GSM Module Idenficiation Label
1.2 FEATURES AND BENEFITS FOR VANGUARD SC
 Supports Dynamic or Static IP
 Inbound and Outbound Ethernet Routing
 DHCP Server and Inbound port mapping/translation (Port Forwarding)
 Firewall configuration for increased network security
 Diversity antenna port/auxiliary port for increased receive sensitivity
 Local or remote configuration using HTML web server
 TCP/IP Packet assembler and dis-assembler for serial connected devices
 Inbound IP termination with Static IP
 Modem Domain Names with Dynamic DNS
 Embedded Linux on ARM 9 processor
 Internet access and web browsing via Ethernet connector
 VPN support
 On-board 1.8/3V SIM socket (Active only for GSM Models)