User manual

88
 Report every () meters:
Trigger the sending of a new remote report if the distance since the last remote report exceeds the specified
distance (in meters).
 But no less than () seconds between reports:
To prevent a fast-moving vehicle from reporting too frequently, a lower limit on the time between reports can be
specified.
 TCP Server Format:
Reports in the specified format (see the table above) are available to remote clients that connect to TCP port 6258
of the Vanguard Cellular Broadband Router.
 UDP Host (1,2,3) Format:
Reports in the specified format (see the table above) are sent to the specified IP address & port. NOTE: Different
reports can be directed to the same UDP Host address & port.
 UDP Host (1,2,3) Address:
IP address of the UDP Host in dotted decimal format.
 UDP Host (1,2,3) Port:
IP Port of the UDP Host (1024-65535).
3.9.3 STATUS
This section displays the current status of the GPS receiver. Click on the “Refresh” button to update the display.
Figure 49: GPS – Status
 Condition:
Indicates the quality of received GPS reports.
Not Installed
This unit does not have a GPS receiver installed.
Disabled
The cell-module GPS receiver has be disabled.
No Fix / Invalid
The GPS receiver has not yet acquired enough
satellites to provide an accurate position, or the