User manual

77
GRE Tunnel Configuration
 Local IP Address:
The local (normally WAN interface) IP address associated with the tunnel.
 Remote IP Address:
The remote IP address associated with the tunnel.
 Tunnel IP Address:
The IP address assigned to the tunnel interface.
[ Example: 192.168.10.100 ]
 Tunnel Subnet & Mask:
The tunnel subnet and mask that must include the above Tunnel IP Address.
[ Example: 192.168.10.0/24 ]
 Remote User Subnet 1 & Mask:
The IP network representing that of the remote user subnet, accessible via the tunnel.
[ Example: 192.168.20.0/24 ]
 Remote User Subnet 2 & Mask:
A possible second IP network representing another remote user subnet.
[ Example: 192.168.15.0/24 ]
NOTE:
 All subnets must differ from one another.
 If more than two remote user subnets are necessary, additional routes can be setup manually via the Router |
Static Routes web page using the Tunnel IP Address as the gateway.
3.8 SERIAL
From the main navigation pane, select Serial for access to both external and internal serial port configuration screens.
3.8.1 EXTERNAL SERIAL
The External Serial screen is used to configure the RS-232 Serial Port parameters and Packet Assembler and Disassembler
(PAD) functionality. The PAD feature forwards requests that come in on a specific port to the Serial connector.