User manual

71
IPsec Tunnels
 Status:
The number of established IPsec tunnels based on the number of tunnels Enabled on the Security | IPsec page.
3.7.2 PPTP
The Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks (VPN).
Figure 43: Security – PPTP
PPTP Client Configuration
 PPTP Client
Selecting Enable will allow the PPTP functionality. Selecting Disable will shut off PPTP functionality.
 Set Default Route to PPTP
Selecting Enable will route all IP traffic through the PPTP network. Selecting Disable will route only PPTP traffic
through the PPTP network.