User manual

70
 Metric
Enter a number from 1 to 20. The lower the metric value the higher the route priority.
The ADD button must be pressed to add the configured route to the Static Route Table.
3.7 SECURITY
From the main navigation panel, select Security for access to PPTP, IPsec and GRE screens.
3.7.1 STATUS
Figure 42: Security – Status
PPTP Client
 PPTP Client Status:
Indicates the status of the PPTP Client interface, usually UP when connected properly. PPTP is the Point-to-Point
Tunneling Protocol used to implement a Virtual Private Network (VPN)
 PPTP IP Address:
The current IP address assigned to the modem by the VPN server.
 PPTP Subnet Mask:
Usually set to 255.255.255.255, but may be different depending on VPN.
 PPTP P-t-P:
The PPTP P-t-P is the LAN address of your VPN server.
PPTP Client
 Status:
The PPTP Server is either ENABLED or DISABLED based on user's selection on Security page.
 Connected Users:
Number of users currently connected to the PPTP Server.