User manual

69
3.6.2 STATIC ROUTES
Select the Static Routes tab to open the routing configuration page. Static route tables may be created from the Routing
screen and appear at the bottom. Static Routing refers to a manual method used to set up routing between networks.
Figure 41: Router – Static Routes
Static Routes
 Route Name
Sets the alphanumeric identifier of the static route in the Static Route Table.
 Destination IP Address
Sets the IP address of the destination network.
 IP Subnet Mask
Sets the subnet mask of the destination network.
 Gateway
Sets ppp (this router's wireless internet connection), pptp (VPN), GRE Tunnel, or the local network IP address for
the gateway to the destination network.
 Gateway IP Address
This is only used if local IP addr was selected for gateway. Enter the address of the local gateway.