User manual

 Primary IP Address:

This parameter should be set to the Primary Home Agent IP Address supplied by the provider.

 Secondary IP Address:

This parameter should be set to the Secondary Home Agent IP Address supplied by the provider.

 MN-AAA SPI:

This parameter should be set to the MN-AAA SPI setting supplied by the provider. This is a numeric setting.

 MN-HA SPI:

This parameter should be set to the MN-HA SPI setting supplied by the provider. This is a numeric setting.

 Home Agent Secret:

This parameter should be set to the Home Agent Secret (password) supplied by the provider.

 AAA Secret:

This parameter should be set to the AAA Shared Secret (password) supplied by the provider.

 Reverse Tunneling:

Reverse Tunneling may be enabled or disabled, as specified by the provider.

 Program:

Pressing the program button will prompt you to confirm you wish to program the current displayed settings. If

confirmed, the settings will be programmed and the unit will reboot.

 Active Profile:

Displays which profile is active. The field cannot be modified, instead press the Change button to select the other

profile.

 Switch Profile:

Pressing the Switch Profile button will prompt you to confirm you wish to switch to activate the other profile. If

confirmed, the other profile will be selected and the unit will reboot.