User manual

38
 Auto-Activation:
Choose Enable to direct an unprovisioned unit to attempt OMA-DM activation once per power-up.
Click the SAVE button to save your desired setting after making a change.
Manual Initiation of OMA-DM Provisioning
This section will only be displayed for units which are capable of automatic (OMA-DM) provisioning. The activation status is
displayed, and a button is provided to direct the unit to begin an OMA-DM provisioning attempt. Depending on changes to
your carrier's network, it may be necessary to re-provision a unit that has already been activated. The OMA-DM capability is
dependant on whether or not it is offered by your cellular carrier.
 Activation Status:
Displays the activation status as Activated or Not Activated.
Click the OMA-DM button to trigger an OMA-DM provisioning attempt.
Activation Type
This section is displayed for units that are not capable of automatic (OMA-DM) provisioning. Availability of OMA-DM is
carrier dependant. For carriers that do not support OMA-DM, the provisioning process must be triggered by entering carrier
specific information and depressing the carrier specified button (OTASP or IOTA).
Command (OTASP Only):
The dial command used for provisioning the modem. For OTASP the number is *22899. For IOTA this field is left blank.
Click the OTASP button to start the provisioning process for units using Verizon.
Click the IOTA button to start the provisioning process for units using Sprint.
3.2.4.1 VERIZON WIRELESS PROVISIONING INFORMATION (OTASP)
Verizon features Over-The-Air Service Provisioning (OTASP) which allows the cellular provider to provision the modem.
 Provisioning must occur in a non-roaming area of the Verizon network with a medium to strong signal strength.
 Select Provisioning from the side menu bar.
 Confirm the OTASP command reads *22899.
 Click the OTASP button.
If unsuccessful, follow the steps below to enter the information manually. Periodically, you should locally or remotely make
sure to click on the OTASP button to ensure the PRL is updated. In some cases this may happen automatically by the carrier.
Manual-Entry Activation
 If provisioning must occur in a roaming area, make sure to have a medium to strong signal strength because
manual-entry activation will be required.
 Select Provisioning from the side menu bar.
 Input the MDN/MTN and MSID/IMSI (MIN) given by your provider
 Put 6 0’s (000000) for the unlock code
 Click the Write MDN/MSID button.