User manual

35
 Dial Number:
The phone number used to initiate a data connection to the cellular provider via PPP. The default dial number is
#777.
 User:
Sets the username required by the cellular provider. Leave blank if not required.Warning: If used in combination
with this modem's VPN Server, this username and password will also be valid on this modem's VPN Server.
 Password:
Sets the password required by the cellular provider. Leave blank if not required.Warning: If used in combination
with this modem's VPN Server, this username and password will also be valid on this modem's VPN Server.
 Authentication:
Selects the authentication protocol used. If Auto is selected, the Vanguard will automatically select a protocol. If
Only Protocols Selected Below is chosen, then the router will only accept requests for the specified protocols.
 Authentication Protocols:
If Only Protocols Selected Below is chosen, then these fields are used to specify each Authentication protocol that
router will accept. At least 1 must be selected. If Auto is selected, these choices will be disabled (greyed out).
 Dial Status:
Click "view" to see a log from the last connection attempt.
3.2.4 PROVISIONING STATUS (CDMA MODELS)
When a new modem is powered up for the first time, most of the provisioning information is blank or has information that
needs to be changed. The device is usually shipped with the radio ready to be provisioned on a cellular carrier’s network.
Features called Over-The-Air Service Provisioning (OTASP) and Internet Over-The-Air (IOTA) are supported, which allow the
cellular providers to program the modem with specific information to activate the account.