User manual

31
 Carrier APN:
The Access Point Name provided by the cellular provider required to access the network.
 Dial Number:
The phone number used to initiate a data connection to the cellular provider via PPP.
 User:
Sets the username required by the cellular provider. Leave blank if not required.Warning: If used in combination
with this modem's VPN Server, this username and password will also be valid on this modem's VPN Server.
 Password:
Sets the password required by the cellular provider. Leave blank if not required.Warning: If used in combination
with this modem's VPN Server, this username and password will also be valid on this modem's VPN Server.
 Authentication:
Selects the authentication protocol used. If Auto is selected, the Vanguard will automatically select a protocol. If
Only Protocols Selected Below is chosen, then the router will only accept requests for the specified protocols.
 Authentication Protocols:
If Only Protocols Selected Below is chosen, then these fields are used to specify each Authentication protocol that
router will accept. At least 1 must be selected. If Auto is selected, these choices will be disabled (greyed out).
 Dial Status:
Click "view" to see a log from the last connection attempt.
3.2.2 SIM SETTINGS (GSM MODELS)
One of the key features of GSM is the Subscriber Identity Module (SIM), commonly known as a SIM card. The SIM is a
detachable smart card containing the user's subscription information. This allows the user to retain his or her information
after switching handsets. The SIM has a security feature which, when enabled, will require the user to enter a valid PIN
before the modem will connect to the cellular network.
From the Home page, select SIM Settings from the left navigation panel to confirm the modem recognized the SIM card.
SIM STATUS should read ACCEPTED. PIN STATUS may show the PIN to be DISABLED or ACCEPTED.