User manual

30
3.2 CELL CONNECTION – VANGUARD SC
3.2.1 DIAL SETTINGS (GSM MODELS)
Figure 18: Cell Connection – GSM Dial Settings
Dial Settings
 Auto Connect:
When set to Enable, will allow the modem to automatically dial the connection when the modem is powered.
When set to Disable, the modem will not automatically dial the connection to the cellular provider and will not
attempt to automatically re-connect when the connection has dropped.
 GSM Band:
This selection is used to configure the modem to operate on a set of frequency bands.
o ALL – All available bands will be accessible, commonly called autoband. (Default)
o WCDMA 2100 – Uses the 2100MHz frequency band in UMTS/HSDPA networks.
o EGSM – Uses the 900/1800 MHz European GSM frequency band.
o ALL GSM – Can use any available GSM frequency band, Europe 900/1800 MHz or USA 850/1900 MHz.
o ALL WCDMA – Can use any available WCDMA frequency band, 850/900/2100 MHz in UMTS/HSDPA
networks.