Installation manual

Vanguard 7300 Installation 3-23

Connecting Vanguard 7300 DC Power

DC Power Supply

Connector Parts

Parts for the connector are not supplied by Vanguard Networks. This table lists all

required parts and pinouts for fabricating the connector:

DC Connector

Pinou

is table lists the Vanguard 7310 DC Connector pinouts:

Note

For detailed electrical specifications, refer to Appendix A, Specifications. For a

summary of cabling information, refer to Appendix B, Vanguard 7300 Cable

Connectors and Pinouts.

Quality Item AMP Part

Number

Description

1 Connector housing 206060-1 AMP CPC, 4-pin Socket (Female), Hood

3 Pins 66601-2 AMP gold-plated Type 111+ signal pins

1 Cable Clamp 206062-3 AMP Clamp, 2-screw, max. Cable Diam.:

8.36mm [.329 in.]

ariable) Wire (18AWG min.) N/A UL/CSA-approved insulated stranded wire

Pin Number Description

1 -48V

2 -48V RTN

3 Chassis Ground

4 (No Connection)