Installation manual

Vanguard 7300 Installation 3-5
Before You Begin
In Case of
Damaged or
Missing Parts
If the equipment is damaged, contact the shipper. If you have additional concerns
about damaged or missing parts, contact your nearest Vanguard Networks
representative.
In the United States, contact: Vanguard Networks,
Customer Administration, 25
Forbes Boulevard, Foxboro, MA 02035. Telephone:
[phone]. Outside the United States, contact the nearest V
anguard Networks
distributor.
Items Not Supplied You need the following items to install your
Vanguard 7300 and its components:
• Number 2 Phillips head screwdriver, four inch shaft
• Slotted-head screwdriver
• Screws and any other required rack hardware
• PC or VT100 console for configuration and diagnostics
• Optional network port cables
• Electrostatic Discharge (ESD) straps