Installation manual

3-36 Vanguard 7300 Installation
Cabling Procedures
Token Ring Card
Cabling All cabling for the Token Ring card is done at the front of the card as shown in
Figure 3-29. All connections are located on the front of th
e card. The Token Ring
card has two ports and each port supports only one UTP or STP connection. Th
e
Token Ring card can be installed in any slot other than slot 1. Either a UTP or STP
cable can be used by connecting the cable to the appropriate port. The cable type is
automatically selected. A standard RJ45 connector will be provided for UTP and a
standard DB9 connector will be provided to STP cables.
Warning
Attaching a CTP cable to a UTP port damages the token ring card.
Figure 3-29. Token Ring Connections
STP STP
UTP
PORT 1
UTP
EXT ST
PORT 2