Installation manual

Part No. T0249-01, Rev A
April, 2002
Installing Software Images and Bootprom Software Updates Page 9 of 55
Installing Software Images and Bootprom Software Updates
Introduction This section provides instructions for Coldloading the software images and
Bootprom using Procomm Communication software.
Caution
Procomm
Procedure
Use the steps in this procedure to coldload the software images or Bootprom using
Procomm Communication software:
Note
Boot Prom revision 1.50 is current for release 6.0 Point Release 01B software on
the Vanguard 7300 Series.
1) To determine the current version of Bootprom loaded on your Vanguard, perform
these steps:
Step Action
a) Access the Console Terminal Program’s (CTP) Main Menu.
b) Select Option 5, Status/statistics.
c) Select Option 1, Node Stat, from the Status/statistics menu. The Node
Stats’ displays the Bootprom Revision: 7300 Series Examples:
Version 1.10, 1.11, 1.30, 1.40 or Version 1.50.
Note
Refer to the Bootprom Directory table in Step 9.