Installation manual

Part No. T0249-01, Rev A
April, 2002
MIB Downloading Instructions for Non-Vanguard Managed Solutions SNMP Managers Page 45 of 55
MIB Downloading Instructions for Non-Vanguard Managed
Solutions SNMP Managers
Introduction This section lists Vanguard MIB files needed for SNMP management of Vanguard
devices when using a non-Vanguard Managed Solutions SNMP Network
Management System (NMS).
Obtaining MIB Files Vanguard MIB files for your non-Vanguard Managed Solutions NMS can be
downloaded from the internet. The address for the server is:
http://www.vanguardms.com/customersupport/drivers.html
On the internet, there is one ZIP file for the PC and one ZIP file for UNIX. You must
unzip the ZIP file to get the MIB files. The contents of these two ZIP files are
identical. However, the formats of the files in these two ZIP files are slightly
different due to the way PCs and UNIX systems handle text files.Depending on the
protocols and options provided by the Applications Ware image installed in your
node, you might not need all the MIB files. See the section below for details on the
files you should have to support SNMP management for Vanguard products.
Required Files and
Loading
The following MIB files are required by your NMS to perform SNMP management
of Vanguard products:
• rfc1213.mib
• cdx_6500.mib
These files must be loaded first and in the order shown.
After you load these required files onto your NMS, you can load the MIB files for
the options and protocols installed on your Vanguard hardware. See the section
below.
MIB Files for
Options/Protocols
This table lists the contents of options and protocol MIB files for Vanguard products.
Use this table to determine which MIB files you need to download.
Download This
MIB File
If you want this option, protocol, or base MIB
software
alc.mib ALC protocol
bcst.mib Broadcast
bri.mib ISDN BRI protocol
bridge.mib Bridging option
bsc2780.mib BSC2780 protocol
bsc3270.mib BSC3270 protocol
bstd.mib Burroughs Poll/Select protocol